Salice Hinges Series 200

The Series 200 make up an integrated system of hinges developed to provide a solution to any situation involving concealed hinges. Bright nickel plated steel cup and arm. Dimensions of the � 35 mm cup

94° Opening Angle 94 ° opening angle For thick door with special profiles 3 - 8mm drilling distance Fits doors up to 32mm (1-1/4") thick 11 mm deep metal cup ANSI, BHMA rated; ISO 9001. WIC approved	110° Opening Angle 110 ° opening angle To be used when a greater opening angle is required Fits doors up to 32mm thick 3 - 6mm drilling distance For overlay or inset 11 mm deep metal cup ANSI, BHMA rated; ISO 9001. WIC approved	120° Opening Angle 120 ° opening angle To be used when a greater opening angle is required Fits doors up to 32mm thick 3 - 6mm drilling distance 11 mm deep metal cup ANSI, BHMA rated; ISO 9001. WIC approved
155° Opening Angle 155 ° opening angle To be used when a greater opening angle is required Minimum door thickness 11mm Zero Protrusion at 90° 8 mm deep metal cup 3 - 8mm drilling distance ANSI, BHMA rated; ISO 9001. WIC approved	165° Opening Angle 165 ° opening angle hinge with greater opening angle and reduced operating profile Fits doors up to 28mm thick 11 mm deep metal cup Possible boring distance 3mm - 8mm ANSI, BHMA rated; ISO 9001. WIC approved	Complementary Glass Door Hinges 26mm hole diameter 94° opening Fits glass 4mm to 6mm thick Possible drilling distance 5.5 to 6.5 mm
Complementary Wooden Doors Negative Angle 11mm deep metal cup 120° opening 3 to 6mm drilling distance Compatible with traditional series 200 mounting plates and Domi snap-on mounting plates	Complementary Wooden Doors Positive Angle 11mm deep metal cup 94° opening 3 to 8mm drilling distance Compatible with traditional series 200 mounting plates and Domi snap-on mounting plates	Complementary Crampon Hinges for Cabinet Sides 11mm deep metal cup 94° opening 3 to 6mm drilling distance Compatible with traditional series 200 mounting plates and Domi snap-on mounting plates
Complementary Corner Cabinets 11 mm deep die-cast cup 35 mm cup diameter Opening angle of the first door 70° Possible drilling distance on the door from 3 to 6 mm